Eternal Rival : High Tier Case with Art - Fightstick Keyboard Style With Art Fightstick include WASD PCB
|Comparison Table|| Mid Tier Case
||High Tier Case|
|Side Walls||1 Layer||2 Layers|
|Color Plexi Allowed||1||2|
Outer and Inner Plexi?
Each side of the case comes in two layers of 3mm plexi glass. The outer cosmetic layer and the inner structured layer. The inner structured is exposed via the edge and the underside of the lip.
- Gloss Black – A slick finish that looks very classy. Prone to fingerprints though.
- Matte Black- A flat black finish that is durable and finger print resistant.
- Gloss White – A slick finish that looks very classy. Cannot see finger prints.
- Clear – See through
- MDF – Slick Fibrous board.
What am I getting?
You will be getting a disassembled fightstick/stickless that you will need to put together. Included will be a one in all general instructions guide almost similar to IKEA. No glue is needed. Just need a phillips screwdriver.
- (optional)A panel with mounting holes for Brook PCB/ENCODER
- (optional) PCB/ENCODER mounting hardware that work with Brook fighting boards. (M3)
- Black Hardware for black cases, Silver for everything else
- All the necessary hardware
- Panels to assemble the fightstick
The Eternal Rival PCB allows you to bring the keyboard to your fightstick. The pcb has a joystick connector that can be easily plugged into the 20 pin harness joystick connector, or standalone joystick connector. The pcb also allows you to hot swap switches, so there’s no need to solder, and if you don’t like the switches you are using, you can easily swap them out. The WASD PCB is compatible with Cherry MX switches or similar style
Artwork Print included!
This fightstick enclosure comes with a print artwork that is sandwiched between the 2 top layers. You can download the template on our website at https://www.eternalrival.com/pages/artwork-template-download. You can provide artwork via email to firstname.lastname@example.org or provide a hyperlink of the art.
Why does it cost more to include PCB mounting holes and flush/sink top panel holes.
All cases are made to order and to reduce the time producing cases we have the option to include or remove sink holes that doesn't affect the integrity of the case. By shaving off production time the price of the enclosure will be reduced.
-No pcb mount holes and hardware option : Means there will no holes to mount the pcb. You will need to use adhesive stands to support the pcb in place.
-No flush screws on top panel (corners only) - Instead of flush mount flat head screws for the top, you will get pan head screws with washers to secure the case.
Snap in and screw on buttons are compatible with this case. Cherry MX or similar are needed for the WASD PCB
Utility Button Layout
There is 3 utility mounting holes on the left and right panels of the case. Images showing utility buttons on the front panel is outdated. Neutrik mounting holes are off centered on the front panel.
- Dimension - 15.25inx8in~x3in~ (Comes in different Height)
- x6 - 24mm Utility Buttons
- X8 - 30mm – Action Buttons
- X4 - Cherry mx Switches or similar
- Key Caps for the Keyboard Switches
Laundry list of parts for a working fightstick for this case. (This is just a baseline list) Arcadeshock.com sells kits with everything you need.
- BROOK PCB of your choice
- 20pin cable - https://tinyurl.com/20pinharness
- TP/R3/L3 cable - https://tinyurl.com/L3R3TPHARNESS
- Neutrik - Link (Brook PS4+ Audio and Brook Wireless doesn’t not require a neutrik, but you will need to get screws to mount its port since Brook does not provide it)
- Short printer cable (PCB to the Neutrik)
- Long Printer cable (Neutrik to Console)
- Don’t forget the Buttons