Eteranl Rival - High Tier Case with Artwork - Stickless All-Buttons Snap-in or Screw On

$ 79.99
Outer Plexi Color:
Comparison Table  Mid Tier Case
High Tier Case
Side Walls 1 Layer 2 Layers
Structural Pillars 4 6
Color Plexi Allowed 1 2
Bordered Style No

Yes (Non Art)

Flush Mount Top Screws is now standard for high tier cases.
PCB Mounting Holes and Hardware - optional Include no charge.

Outer and Inner Plexi?  

Each side of the case comes in two layers of 3mm plexi glass. The outer cosmetic layer and the inner structured layer.  The inner structured is exposed via the edge and the underside of the lip.  

The Materials  

  • Gloss Black – A slick finish that looks very classy. Prone to fingerprints though.  
  • Matte Black- A flat black finish that is durable and finger print resistant.   
  • Gloss White – A slick finish that looks very classy. Cannot see finger prints.  
  • Clear – See through

New! Top or bottom Spacer Panels

Add another layer to the top and bottom of the enclosure to increase the weight as well as the sturdiness of the case! Increases the height of the by .220in.

    What am I getting?  

    You will be getting a disassembled fightstick/stickless that you will need to put together. Included will be a one in all general instructions guide almost similar to IKEA. No glue is needed. Just need a phillips screwdriver.  

    What’s included:  

    • All the necessary hardware  
    • Panels to assemble the fightstick  
    • Flush Mounted Top Screws
    • Neutrik support plexi

    Artwork Print included!  

    This fightstick enclosure comes with a printed artwork that is sandwiched between the 2 top layers. You can download the Art template on our website at to create your masterpiece. After checking out you can provide artwork via email to or provide a hyperlink of the art in the text box provided. 

    Button Compatibility  

    Snap in and screw on buttons are compatible with this case.  

    Utility Button Layout 

    There is 3 utility mounting holes on the left and right panels of the case. Images showing utility buttons on the front panel is outdated. Neutrik mounting holes are off centered on the front panel. 


    • Dimension - 15.25inx8in~2.25-2.5in

    Buttons Needed  

    • 17 - 24mm Buttons
    • 1 – 30mm Button 

    Laundry list of parts for a working fightstick for this case. (This is just a baseline list) sells kits with everything you need.  


    You may also like

    Recently viewed