Eternal Rival Keyboard Style Mini

$ 39.99


Case comes in two layouts 6 30mm button layout or 8 24mm button layout. Please select in the customization field.

The Materials
•    Gloss Black – A slick finish that looks very classy. Prone to fingerprints though.
•    Matte Black- A flat black finish that is durable and finger print resistant.
•    Gloss White – A slick finish that looks very classy. Cannot see finger prints.
•    Clear – See through
•    Plywood case is all plywood.
•    Plywood case with plexi - The top is plywood which is covered by a sheet of clear plexi.

There is no artwork print for this listing. You will be getting a colored top Plexi of your choice. If you want artwork in the future, we have a listing where you can buy the clear acrylic top and artwork.  COMING SOON

Enclosure cannot be customized due to the tightness of the configuration. We will not make any customs to this case.

The Eternal Rival PCB allows you to bring the keyboard to your fightstick.  The pcb has a joystick connector that can be easily plugged into the Brook 20 pin harness, or standalone joystick connector. The pcb also allows you to hot swap switches, so there’s no need to solder, and if you don’t like the switches you are using, you can easily swap them out.  The WASD  PCB is compatible with Cherry MX switches or similar style.

What am I getting?
You will be getting a disassembled fightstick/stickless that you will need to put together. Included will be a one in all general instructions guide almost similar to IKEA. No glue is needed. Just need a phillips screwdriver.

What’s included:
•    A panel with mounting holes for Brook PCB/ENCODER
•    PCB/ENCODER mounting hardware that work with Brook fighting boards. (M3)
•    Black Hardware for black cases, Silver for everything else
•    All the necessary hardware
•    Panels to assemble the fightstick
•    1.5ft USB B to USB A cable.

Button Compatibility
Snap in and screw on buttons are compatible with this case.

Buttons Needed  for 8x 24mm layout
•    12 – 24mm
•    4 Cherry MX for the WASD
•    4 Key caps for the Keyboard switches

Buttons Needed  for 6x 30mm layout
•    6 – 24mm
•    6 – 30mm
•    4 Cherry MX for the WASD
•    4 Key caps for the Keyboard switches

10.75”x.7.75”x2.0~” (we provide different heights)

Utility Button Layout

For the x8 24mm - The 4 buttons are for Start/Share/TouchKey/Home. We recommend Sanwa snap-ins for utility buttons.

For the x4 30mm - The 6 buttons are for Start/Share/TouchKey/Home. The 2 on the right side panel are R1/L1. We recommend Sanwa snap-ins for utility buttons.

  • BROOK PCB of your choice
  • 20pin cable -
  • TP/R3/L3 cable -  
  • Neutrik - Link (Brook PS4+ Audio and Brook Wireless doesn’t not require a neutrik, but you will need to get screws to mount its port since Brook does not provide it)
  • Long Printer cable (Neutrik to Console)
  • Don’t forget the Buttons


You may also like

Recently viewed